Structural features:

• Height options: 1.10 m or 1.25 m
• Weatherproof, self-supporting structure made of stainless steel with a clear acrylic glass body.
• Gear unit: Rugged gear with automatic feed from an opening of approx. 45°, Detent pawls released by 24V D.C. voltage coils 100% ED
• Possible drives: either open-circuit principle with manual release possible in case of power failure, or closed-circuit principle with automatic release in case of power failure, Controlled CW or CCW rotation with blocking of the opposite direction
• Option: Controlled CW and CCW rotation with blocking of the opposite direction
• Revolving body made of stainless steel, Centre column running in bearings in the gear and at the bottom side, Wings made of stainless steel or clear acrylic glass
• Control connectors: Drive "Turnstile - free CW rotation", Drive "Turnstile - free CCW rotation", Feedback "CCW rotation", Feedback "CW rotation"
• Option: Electric motor control with service function for automatic feed of the revolving wing in final position as an extension for turnstiles.

Structural features:

• Weatherproof, self-supporting housing structure made of stainless steel.
• Motor-driven pivot barrier with 3 stainless steel arms, which can be folded down.
• Foldable arms, which are folded down via remote control or in case of power failure and which are folded up again via remote control or automatically when power is restored.
• Lockout even under load.
• One evaluator unit for unidirectional operation (the opposite side will be provided with a blind plate) or two evaluator units for bi-directional operation can be integrated.
• Integrated LED signalling in three colours (red, yellow, green).
• The height of the upper barrier arm is 90 cm. The clear passageway is at least 55 cm.

The access gate XTS30 is also available with a top to accommodate advertisements. Then it is provided with the following additional features:

• Separately switchable "overhead" signals in two colours (red, green).
• Holder for backlit advertising space at eye level, double-sided design. Advertising space approx. A3 landscape.

Structural features:

• Weatherproof, self-supporting structure made of stainless steel with a body and lateral pedestrian guidance made of clear acrylic glass
• Weight: approx. 150 kg (complete device)
• Gear unit: Rugged gear with automatic feed from an opening of approx. 45°, detent pawls released by 24V D.C. voltage coils 100% ED
• Possible drives: either open-circuit principle with manual release possible in case of power failure, or closed-circuit principle with automatic release in case of power failure, controlled CW or CCW rotation with blocking of the opposite direction
• Option: Controlled CW and CCW rotation with blocking of the opposite direction
• Revolving body made of stainless steel, centre column running in bearings in the gear and at the bottom side, wings made of clear acrylic glass
• Control connectors: drive "Turnstile - free CW rotation", drive "Turnstile - free CCW rotation", feedback "CCW rotation", feedback "CW rotation"

Scheidt & Bachmann offers turnstiles for security areas with the following features:

• Frame as self-supporting structure with body and lateral pedestrian guidance made of round stainless steel tubing
• Turnstile column running in bearings at the motor drive and at the ground, with straight bars made of round stainless steel tubes or with bent round tube bows
• Arms in the form of straight bars made of round stainless steel tubing
• Dimensions: Height of the turnstile facility approx. 210 cm, outside diameter approx. 150 cm
• Drive / gear: Motor-driven synchronous drive, Rotation per guest 120°
• Climb-over protection
• All parts of the mechanics are made of rustproof and corrosion-protected material.

Freely rotating exit, also suitable for wheelchairs and baby carriages.

• Weatherproof, self-supporting structure made of stainless steel body and lateral pedestrian guidance made of round stainless steel tubing
• Gear unit: Rugged gear with back-run safety mechanism
• Turnstile column running in bearings at the gear and at the top
• with straight bars made of stainless steel
• Arms in the form of straight bars made stainless steel
• Rotation per guest 120°
• Mounted with dowels on a base plate to be provided by the customer